FRONT DRIVING MECHANISM DIFFERENTIAL REMOVAL
Drain the differential oil (page 4-16).
Remove the following:
- front fender/inner fender (page 3-6)
- left drive shaft(page17-7)
Remove two bolts, guard plate and front speed sensor.
Remove two bolts and clutch cover.
Remove the rear speed sensor wire and front final clutch wire from the clamp. Remove the three bolts, front clutch cover stay and rear speed sensor. Disconnect the front final clutch 2P (Green) connector.
Disconnect the front differential case breather hose.
17-14
Remove the differential case mounting 8 mm bolt and nut.
Remove the bolts and differential case mounting bracket.
Remove the differential case upper mounting bolt/ nut and distance collar.
Remove the differential case lower mounting bolt.
Move the differential forward for maximum clearance between the propeller shaft joint and engine.
Pull the propeller shaft joint out of the output shaft of the engine.
Remove the O-ring.
17-15