CENTRIFUGAL CLUTCH
REMOVAL
Remove the front crankcase cover (page 11-6).
Be careful not to damage the crankshaff threads.
Unstake the clutch lock nut.
Hotd the dutch drive plate using the special tool and loosen the lock nut.
TOOL:
Clutch holder
O7ZMB-HN20001 07ZMB-HN20101 0TZMB-HN20200
- holder plate
- holder pin
U.S.A. TOOL: Clutch holder
DTZMB-HN2A1D1
Remove the lock nut and washer.
Remove the centrifugal clutch assembly using the apes cialtool‘
TOOL: Clutch puller, 35 x 1.0 mm
07933-HA80000 or 07933-H33000A {U.S.A. only}
Remove the primary drive gear and washer.
11-10
CENTRlFUGAL CLUTCH
DISASSEMBLY/INSPECTION
ONE-WAY CLUTCH
You should be able to turn the clutch weight assembly counterciockwise smoothly, but the assembly should not tum clockwise.
Remove the clutch weight assembly from the clutch drum while turning it counterclockwise.
Remove the sprag clutch from the clutch drum.
CLUTCH DRUM
Check the weight contacting surface for scratches or abnormal wear.
Measure the drum I‘D.
SERVICE LIMIT: 140.4 mm {5.53 in)
Check the Sprag ciutch for abnormal wear, damage or irregular movement.
Check the sprag clutch contacting sun‘ace for abnormal wear or damage.
DRIVE PLATE
Check the sprag ciutch contacting surface for abnormal wear or damage.
11-11