ENGINE / LOWER UNIT REMOVAL
REMOVAL
- ENGINE
1. Turn lock lever (1) and remove the engine cover (2)
2. If equipped with the early model fuel pump, remove the pump cover (Serial numbers BF75 1000004 ~ 1102880 and BF100 1000004 ~ 1101260) Disconnect fuel tubes (4) from pump (3).
3. Remove breather tube (5), carburetor overflow tube (6), and cooling water tube (7) from tube connector (8).
4. Loosen lock screw (9) and remove throttle link (10). remove choke link (11) from choke knob (12).
4-30
DISASSEMBLY AND SERVICE 5. Remove rectifier (13) by unscrewing the 6 mm bolt. Remove the cotter pin and 5 mm clevis pin (14).
6. Disconnect wire leads (15), (16), and (17) coming from the rectifier, engine switch and oil indicator lamp at their connections.
7. Disconnect wire lead (18) from the oil pressure switch.
8. Remove the lower mount housing (20) by unscrewing two 8 mm bolts (19).
4-31